Tycon Power Green Power Accessories

POE - Power Over Ethernet Power Sources / Injectors

Power over ethernet power sources deliver power and data over CAT5 cable. They are a power supply and inserter in one package. They are used to provide power to electronic devices remotely up to 100 meters. All POE power sources have autoranging inputs from 110VAC 60hz to 240VAC 50hz. They feature automatic overvoltage protection, short circuit protection and over current protection. They are UL/CB/CE/FCC listed and meet RoHs requirements.

POE Inserter with built in Ethernet Surge Protection

TP-POE-xx POE power sources / inserters supply up to 24W and are available in DC Voltages of 18V, 24V and 48V. They are suitable for remotely powering all kinds of electronic devices that accept power over Ethernet. These POE power sources supply power on Pins 4,5 (V+) and Pins 7,8 (V-). They are available in Passive POE and 802.3af POE models. (Spec Sheet) | (User Guide)
TP-POE-18 120/240VAC Input, 18VDC 18W POE output
TP-POE-24 120/240VAC Input, 24VDC 19W POE output
TP-POE-48 120/240VAC Input, 48VDC 24W POE output
TP-POE-48D 120/240VAC Input, 48VDC 24W 802.3af POE output

They are also available in Gigabit Ethernet models: (Spec Sheet) | (User Guide)
TP-POE-18G 120/240VAC Input, 18VDC 18W Gigabit POE output
TP-POE-24G 120/240VAC Input, 24VDC 19W Gigabit POE output
TP-POE-48G 120/240VAC Input, 48VDC 24W Gigabit POE output
TP-POE-48GD 120/240VAC Input, 48VDC 17W 802.3af Gigabit POE output

All these POE Inserters have built in Ethernet surge protection which eliminates an additional component from the system.

Also available is the TP-POE-24IR-CI which is a special 24V POE inserter with reverse voltage pinout (compatible with Motorola Canopy) and current indicator LED. (Spec Sheet) | (User Guide)

TP-POE-HP-xx high power POE power sources / inserters supply up to 50W of DC power and are suitable for powering high power electronics. They are available in DC voltages of 18V, 24V and 56V. These POE power sources supply power on Pins 4,5 (V+) and Pins 7,8 (V-). (Spec Sheet) | (User Guide)
They are available in Passive POE and 802.3at/af POE models.
TP-POE-HP-18 120/240VAC Input, 18V 36W POE Output
TP-POE-HP-24 120/240VAC Input, 24V 48W POE Output
TP-POE-HP-48 120/240VAC Input, 56V 50W POE Output

They are also available in Gigabit Ethernet models: (Spec Sheet) | (User Guide)
TP-POE-HP-24G 120/240VAC Input, 24V 48W Gigabit Output
TP-POE-HP-48G 120/240VAC Input, 56V 50W Gigabit Output
TP-POE-HP-48GD 120/240VAC Input, 56V 35W 802.3at Gigabit Output

The TP-POE-HP-56 is a very high power Gigabit Compatible Passive POE source/inserter with 100W of DC power available for powering high power electronics. (Spec Sheet) | (User Guide) | (Application Note)

Low Cost Wall Plug POE Inserter

TP-POE-xx-WP Wall Plug POE power sources / inserters supply up to 24W and are available in DC Voltages of 15V, 24V and 48V. They are suitable for remotely powering all kinds of electronic devices that accept power over Ethernet. They have verious protections for short circuit, over voltage and over current. These Passive POE power sources supply power on Pins 4,5 (V+) and Pins 7,8 (V-). (Spec Sheet)

TP-POE-15-WP 120/240VAC Input, 15VDC 1.5A 23W Passive POE output
TP-POE-24-WP 120/240VAC Input, 24VDC 1A 24W Passive POE output
TP-POE-48-WP 120/240VAC Input, 48VDC 0.5A 24W Passive POE output

802.3af/at POE Converter

TP-POE-1224 is a unique device which converts a standard 802.3af compliant POE input into a non-standard POE output with a jumper selectable POE voltage of 12V or 24V. This allows a customer to power non-standard POE devices from standard 802.3af POE switches and other 802.3af compliant power sources.(Spec Sheet)

TP-POE-1224G 802.3at Input, 12V or 24V 24W Gigabit POE output (Spec Sheet)

Active POE Splitters -20 to +60C Operation

Active POE splitters accept voltage supplied via POE and provide regulated AC and DC outputs. The output is provided via a standard 5.5mm/2.1mm barrel connector on a 14” cable or a wire terminal. The Ethernet data flows through via a 14” CAT5 cable terminated with an RJ45 connector or an RJ45 socket. (Spec Sheet) | (User Guide)
POE-SPLT-2424AC 24VDC POE Input, 24VAC @ 1.7A 40W Output
POE-SPLT-4824AC 48VDC 802.3at Input, 24VAC @ 2.9A 70W Output (Application Note)
POE-SPLT-4812G Gigabit 48VDC 802.3at Input, 12VDC @ 2.1A 25W Output

Inputs and outputs are isolated. They have various protections for surge, short circuit, overload and overvoltage.

DC to DC Converters with built in POE Inserter

TP-DCDC-12xx DC to DC converters take an input of 9-36VDC and convert to 18V, 24V or 48V DC regulated output. They include an integrated POE inserter to apply the DC voltage to the CAT5 cable on Pins 4,5 (V+) and Pins 7,8 (V-). They are perfect for running POE powered equipment from a 12V or 24V battery system. They have 2 isolated inputs to handle two power sources like a primary and backup source for uninterrupted failsafe operation. (Spec Sheet) | (User Guide)
TP-DCDC-1218 9-36VDC Input, 18VDC 18W POE Output
TP-DCDC-1224 9-36VDC Input, 24VDC 19W POE Output
TP-DCDC-1248 9-36VDC Input, 48VDC 24W POE Output

Typical Application - TP-DCDC-12xx DC to DC Converter

TP-DCDC-1248-M is a non-compliant version packaged in a metal enclosure for industrial applications. (Spec Sheet) | (User Guide)

TP-DCDC-1248D is an IEEE 802.3af compliant model which is designed to power a device which meets the 802.3af standard for POE. (Spec Sheet) | (User Guide)

Also available in Gigabit Ethernet Models with 802.3af compatibility and passive POE (Spec Sheet) | (User Guide)
TP-DCDC-1248GD Gigabit 9-36VDC Input, 48V 17W 802.3af POE Output
TP-DCDC-1248GD-M Gigabit 9-36VDC Input, 48V 17W 802.3af POE Output, Metal Housing

High Power DC to DC Converters with built in POE Inserter

TP-DCDC-2448-HP DC to DC converters take an input of 18-36VDC and convert to 56V DC 30W regulated POE output. They are perfect for running POE powered equipment from a 24V battery system. (Spec Sheet) | (User Guide)

TP-DCDC-4824-HP DC to DC converters take an input of 36-72VDC and convert to 24V DC 30W regulated POE output. (Spec Sheet) | (User Guide)

TP-DCDC-4848-HP DC to DC converters take an input of 36-72VDC and convert to 56V DC 35W regulated POE output. (Spec Sheet) | (User Guide)

TP-DCDC-4848D-HP DC to DC converters take an input of 36-72VDC and convert to 56V DC 30W regulated 802.3at/af POE output. (Spec Sheet) | (User Guide)

They include an integrated POE inserter to apply the DC voltage to the CAT5 cable on Pins 4,5 (V+) and Pins 7,8 (V-).
They have 2 isolated inputs to handle two power sources like a primary and backup source for uninterrupted failsafe operation. The input and output power are isolated so they can be used to convert a negative voltage to a positive voltage. Because of their wide input voltage and regulated output, they can also be used to stabilize a voltage output. Example; a voltage source is a long distance from the equipment with wide voltage fluctuations seen at the equipment.

Also available in Gigabit Ethernet Models with 802.3at/af compatibility (Spec Sheet) | (User Guide)
TP-DCDC-1248GD-HP Gigabit 10-15VDC Input, 56V 35W 802.3at POE Output
TP-DCDC-2448GD-HP Gigabit 18-36VDC Input, 56V 35W 802.3at POE Output

Very High Power DC to DC Converters with built in POE Inserter for Axis PTZ

The TP-DCDC-2456GD-VHP is a special very high power DC to DC converter / POE inserter designed and qualified for use with Axis Q6032-E, Q6034-E and Q6035-E outdoor PTZ security cameras. It supplies 70W of power on two separate 802.3at POE channels.
(Spec Sheet ) | (User Guide)

5 Port POE Switch -20C to +85C Operation

TP-SW5G: IEEE802.3at/af Compliant 48VDC 10/100/1000MB POE Switch with up to 35W per port. Switch accepts 48VDC power via a wire terminal connector on the back of the Switch or via 48VDC POE into the 802.3af/at compliant uplink port (90W max). The Switch comes complete with a 48VDC 150W AC/DC power converter. (Spec Sheet) | (User manual)

TP-SW5G-24: IEEE802.3at/af Compliant 48VDC 10/100/1000MB POE Switch with up to 35W per port. Switch accepts 10-36VDC power via a wire terminal connector on the back of the Switch or via 48VDC POE into the 802.3af/at compliant uplink port (90W max). (Spec Sheet) | (User manual)

TP-SW5G-NC: Universal Voltage 10/100/1000MB POE Switch with up to 2A per port. Switch accepts universal voltage (12-57VDC) via the wire terminal connector on the back of the Switch and the POE voltage at each port is equal to the voltage used to power the switch. (Spec Sheet) | (User Manual)

TP-SSW5-NC: Universal Voltage 10/100 POE Switch with up to 2A per port. Switch accepts universal voltage (12-57VDC) via the wire terminal connector on the back of the Switch and the POE voltage equals the voltage used to power the switch. This model is very compact at only 4”x5”x1.5” (Spec Sheet) | (User Manual)

8 Port High Power POE 10/100 Switch -40C to +85C operation

TP-SW8-NC POE 8 port switch is used to expand a single CAT5 Ethernet data line into 7 POE powered data ports with up to 2A output current per port. It has an RJ45 PoE/Data input port (48VDC) which is compliant with 802.3af and 802.3at (Type 2). It also has a secondary dual wire terminal input for operation from 12V to 57VDC. PoE output ports are non 802.3af compliant, the POE output voltage equals the input voltage so it is universal in its application. The switch automatically adjusts speed for the data input up to 100BASET and supports auto crossover in the input port. (Spec Sheet) | (User Manual)

TP-SW8 802.3af POE 8 port switch is used to expand a single CAT5 Ethernet data line into 7 POE powered data ports with up to 35W output current per port. It has an RJ45 PoE/Data input port (48VDC) which is compliant with 802.3af and 802.3at (Type 2). It also has a secondary dual wire terminal input for operation from 42 to 57VDC. PoE output ports are 802.3af compliant with POE voltage of 48V. The switch automatically adjusts speed for the data input up to 100BASET and supports auto crossover in the input port. (Spec Sheet) | (User Manual)

Outdoor POE Switch Enclosure

The ENC-SW-8x5 outdoor weatherproof POE switch enclosure is designed especially for the Tycon TP-SW series of POE switches. It accommodates the 5 port or 8 port switches. They provide an inexpensive and convenient way to locate the POE switch on a tower or antenna mast close to the equipment that uses it.

There are 6 cable feedthrus which can accommodate up to 12 CAT5 or CAT6 or power cables. The enclosure is made from UV and impact resistant plastic for long life and worry free operation. The enclosure can be pole or wall mounted. (Spec Sheet)

4 Port Gigabit Universal Voltage POE Midspan -40C to +85C operation

TP-MS4x4 mid span POE power sources are used for supplying POE and data to multiple devices from a central location such as an operations room or equipment cabinet. The POE devices feature a separate data-in port coupled with a data out/POE port. The POE function is considered Passive POE and supports Gigabit Ethernet. The Midspan features Universal Voltage (UniVolt™) POE outputs where the POE voltage equals the input voltage. All ports can have the same POE voltage or you can assign different voltages to different ports. This is useful for powering different devices with different POE voltage requirements. The Midspan also allows some or all POE ports to be reverse voltage POE which is required by some Passive POE devices like Canopy and EnGenius.
POE DC Voltage (11V-57V) is supplied on pins 4,5 (V+) and 7,8 (V-). Maximum power output per port is 2A. The individual outputs are overcurrent, over/under voltage and short circuit protected.
The midspan is DIN Rail mountable with the included DIN Rail brackets. (Spec Sheet) | (User Guide)

IEEE 802.3at/af Compliant Gigabit High Power POE Midspan Injector

The TP-MS616 rack mount mid span High Power POE power sources are used for supplying POE and data to up to 16 devices from a central location such as an operations room. They can be powered from 100-240VAC 50/60Hz input or 48VDC Input. The POE devices feature a separate data-in port coupled with a data out/POE port. The POE function is fully IEEE802.3at/af compliant and Gigabit Ethernet compatible. The included PC software allows for configuration of the individual ports and for displaying port status through an RJ45 network connection. Ports can be enable/disabled and configured for forced POE output (Passive POE) or IEE802.3at/af detection. POE DC Voltage (55V) is supplied on pins 4,5 (V+) and 7,8 (V-). Maximum power output per port is 40W. The 1U rack mounting accommodates 19" racks with included brackets.
(Spec Sheet) | (User Manual)

IEEE 802.3af Compliant Gigabit POE Midspan Injector

TP-MS3xx Midspan POE Inserters The TP-MS3xx series of rack mount mid span POE power sources are used for supplying POE and data to multiple devices from a central location such as an operations room. They can be powered from 100-240VAC 50/60Hz input or 48VDC Input. The POE devices feature a separate data-in port coupled with a data out/POE port. The POE function is fully IEEE802.3af compliant and Gigabit Ethernet compatible. The included PC software allows for configuration of the individual ports and for displaying port status. The units can be managed via a serial port or over the IP network. Ports can be enable/disabled and configured for forced POE output (Passive POE) or IEE802.3af detection. POE DC Voltage (48V) is supplied on pins 4,5 (V+) and 7,8 (V-). Maximum power output per port is 16.8W. The TP-MS308 has 8 POE ports. The TP-MS316 has 16 POE ports. The TP-MS324 has 24 POE ports. The 1U rack mounting accommodates 19" or 23" racks with included brackets. (Spec Sheet) | (User Manual)

Non-Compliant POE Midspan Injector

The TP-NCMS312 series of rack mount mid span POE power sources are used for supplying POE and data to multiple devices from a central location such as an operations room or weatherproof enclosure. The POE devices feature a separate data-in port coupled with a data out/POE port. The POE function is non-compliant, useful for powering devices that require 18V or 24V DC. POE Voltage is supplied on pins 4,5 (V+) and 7,8 (V-). Maximum power output per rack mount unit is 300W.
(Spec Sheet) | (User Manual)

TP-NCMS412 has 12 Gigabit POE ports at up to 24W per port. It also has AC and DC input. Output voltage is regulated so it is perfect for running on 24V battery systems where input voltage can range to 28VDC and POE output needs to be regulated at 24VDC. The 1U rack mounting accommodates 19" or 23" racks with included brackets. The units operate over a wide temperature range of -20 to +70C.
(Spec Sheet) | (User Manual)

Dual Input Solar/POE Battery Charge Controller 30W Output

Now with 30W POE Output on most models! Tycon Power Systems unique POE/Solar charge controllers (TP-SCPOE-xxx) with built-in POE Inserter have dual inputs to charge batteries from a POE source and also a secondary source like solar panels in order to provide redundancy and insure 100% uptime for critical applications. They have a built in POE inserter and the 12V model has integral DC to DC converter that delivers 12V, 18V, 24V or 48V at the POE port. They have full electronic protections for short circuit, reverse current, over-voltage, over-charge and over-discharge. They control the battery charging current to prevent battery damage from overcharging.

The controller gives priority to the solar panel input so grid electricity consumption is reduced when the solar panel is outputting power sufficient to charge the batteries.

The built-in over-discharge protection and low self consumption ensures the battery is not over-discharged, which greatly increases the life of the batteries. The load is turned off when 12V battery voltage reaches 11V and turns back on automatically when battery voltage reaches 12V. Likewise with a 24V battery system the 24V model turns off the load when battery voltage is 20V and turns back on when battery voltage reaches 22V.

They have five LED indicators to give a quick visual status if current is being supplied by a POE source or solar panel, if battery is charging, If load output is turned on and a warning if battery is connected with reverse polarity.
Solar and Battery Connections are via 4 screw terminals for wire size up to 12AWG. POE Input and Output is via 2 RJ45 shielded connectors. There is a secondary voltage output connector on the back with 5 screw terminals for connecting other electronics to the controller using up to 12AWG wire. The controllers are externally fused with a standard replaceable fuse.
(Spec Sheet) | (User Manual)

There is also a 24V model for 24V battery systems. It's POE output is regulated at 24V. The secondary voltage output has over-voltage protection set at 25V max.
TP-SCPOE-2424 (Spec Sheet) | (User Manual)

Dual Input Solar/POE 24V Battery Charge Controller 60W Output

TP-SC-POE POE/solar battery charge controller

The TP-SCPOE-2424-HP High Power POE/Solar charge controllers with dual inputs charge batteries from a POE source and also a secondary source like solar panels in order to provide redundancy and insure 100% uptime for critical applications. It has a built in POE inserter with 24VDC regulated output. They have full electronic protections for short circuit, reverse current, over-voltage, over-charge and over-discharge. They control the battery charging current to prevent battery damage from overcharging. The Controller accepts up to 2.6A on POE input to provide up to 60W total power capability. It also provides up to 8A on the solar input.

The controller gives priority to the solar panel input so grid electricity consumption is reduced when the solar panel is outputting power sufficient to charge the batteries.

The built-in over-discharge protection and low self consumption ensures the battery is not over-discharged, which greatly increases the life of the batteries. The load is turned off when battery voltage is 20V and turns back on when battery voltage reaches 22V.

The controller has five LED indicators to give a quick visual status if current is being supplied by a POE source or solar panel, if battery is charging, If load output is turned on and a warning if battery is connected with reverse polarity.
Solar and Battery Connections are via 4 screw terminals for wire size up to 12AWG. POE Input and Output is via 2 RJ45 shielded connectors. There is a secondary voltage output connector on the back with 5 screw terminals for connecting other electronics to the controller using up to 12AWG wire. The controllers are externally fused with a standard replaceable fuse.
(Spec Sheet) | (User Manual)

Ethernet Surge Protector

The TP-ESP-1000-POE is a low cost 1000Mbps Network POE Lightning/Surge 5KA protector to help protect equipment from surges due to lightning and grid power fluctuations. It is POE Compatible. It protects all 8 CAT5 pins with 7.5V clamp voltage on the data wires and 70V clamp voltage on the POE power wires. It has an all metal case and shielded RJ45 connectors for EMI suppression. There are 2 integral mounting feet and a separate 16AWG ground wire. (Spec Sheet)

The TP-ESP-100-POE24 is a low cost 100Mbps Network POE Lightning/Surge 5KA protector to help protect equipment from surges due to lightning and grid power fluctuations. It is POE Compatible. It protects all 8 CAT5 pins with 7.5V clamp voltage on the data wires and 46V clamp voltage on the POE power wires. It has an all metal case and shielded RJ45 connectors for EMI suppression. There are 2 integral mounting feet and a separate 16AWG ground wire. (Spec Sheet)

The ENC-ESP-100-POE is a UV resistant and weatherproof outdoor enclosure specifically designed for the TP-ESP-100-POE series of surge suppressors. These enclosures are low cost to keep total cost of installing an outdoor surge suppressor to an absolute minimum. They have an external ground connection and dual CAT5/6 cable feed-through. They can be wall or pole mounted. (Spec Sheet)

Voltage Converters

The TP-VR-2405-USB USB Thingy™ is a voltage converter designed to operate from 12VDC or 24VDC systems and provide a USB port for powering or recharging any electronic device that can get power through USB. The USB Thingy™ is a perfect solution for providing USB power from a wide range of DC power sources, from vehicles to remote power systems. It can also be used to connect to a 12V solar panel for charging USB devices directly from the solar panel. The output is 5V @ 3A or 15W. Input is 1m (39") of 18AWG wire for universal connection. Operates from -40 to +65C. (Spec Sheet)

The TP-VR-2405 and TP-VR-2412 are 15W voltage converters / voltage regulators which accept a variable DC input and provide a regulated voltage output. The 2405 accepts 10-32VDC and outputs 5VDC and the 2412 accepts 18-32VDC and outputs 12VDC. Output power is 15W. Input and output are 12 inches of 18AWG wire for universal connection. Operates from -40 to +65C. (Spec Sheet)

The TP-VR-2424 is a 30W voltage converter/regulator which accepts an input of 18V to 36VDC and provides a regulated output of 24VDC @ 30W. Input and outputs are 12 inches of 18AWG wire for universal connection. Operates from -40 to +65 deg C. (Spec Sheet)

The TP-VRHP-4824 is a 60W voltage converter/regulator which accepts an input of plus or minus 36VDC to 72VDC and provides a regulated output of 24VDC @ 2.5A 60W. These units are perfect for providing 24VDC voltage from -48VDC telecom power. Input and outputs are wire terminals for wire up to 12AWG. Operates from -30 to +65 deg C. (Spec Sheet)

Power Supplies

The PS Series low cost auto ranging switching wall plug power supplies have up to 18W capacity. They are available in a North American plug or European Plug model. They are available in 12V, 15V, 18V, 24V and 48V models. The supplies have a 1.2m DC cable with a 5.5x2.1mm DC Connector.

The small size and unique AC plug orientation of the power supply takes up less room on a plug strip or wall socket because it only takes a single position. Supplies are certified by UL, CE & comply with RoHS requirements. (Spec Sheet)

The medium power PS Series low cost auto ranging switching desktop power supplies deliver 60W of power. They are available in North American Plug or European Plug and come in 15VDC, 24VDC and 48VDC models. They have full short circuit protection and over-current protection. The supplies have a 1.2m DC cable with 5.5/2.1mm DC Connector. They have a 1.2m attached AC power cord.

Supplies are certified by UL, CE & comply with RoHS requirements. (Spec Sheet)

The PSHP Series of High Efficiency and High Power AC to DC power supplies deliver 150W of power at better than 87% efficiency. They are designed for long life operation with MTBF exceeding 40,000 hours. The supplies meet IEC standards for Harmonics and FCC standards for EMI. They also meet California energy commission appliance efficiency regulations.

They are available in 18V, 24V or 48VDC models. They have Short Circuit, Voltage Overshoot, Over-Current and Over-Voltage protections.

Supplies are certified by UL, CE & comply with RoHS requirements. They have a 1.2m DC Cable with a 5.5x2.1mm DC Connector and they come with a 1.2m detachable 3 prong AC power cord with North American or European Plug. (Spec Sheet)

POE - Power Over Ethernet Passive Splitters

POE Splitters are used to take the power supplied from a POE power supply and split off the data and DC power into separate connectors. These splitters are mainly used for powering legacy devices which are not POE enabled but instead get their power from a DC connector. The POE Y Splitters are useful when two devices need remote power, one device being POE enabled to accept power thru the RJ45 and the other device requiring DC power thru a DC connector. The overall length of these devices is 10 inches. The RJ45 Jack is a high quality CAT5 rated jack for high speed data.

The POE-SPLT-S accepts POE power from the CAT5 cable plugged into the RJ45 Jack and routes that DC power to the 5.5/2.1mm DC Plug. It uses shielded connectors and cable for the ultimate protection.

The POE-YSPLT accepts POE power from the CAT5 cable plugged into the RJ45 Jack and routes that DC Power to the 5.5/2.1mm DC Plug and also the RJ45 Plug.

Both splitters use CAT5 pins 4,5 and 7,8 for POE power. (Spec Sheet)

POE - Power Over Ethernet Shielded Passive Injectors

POE Injectors are used to inject DC Power to a CAT5 cable in order to power remote equipment using power over Ethernet. They combine the data and DC power on a single CAT5 cable. The power is injected on pins 4,5 and 7,8 of the CAT5 cable by connecting a DC power supply to the 5.5/2.1mm DC Jack. The remaining pins carry the data. The POE Injectors are shielded connectors and cable.

The POE-INJ-LED-S has 2 LED indicators. One LED indicates that DC power is being supplied to the inserter. The other LED will light up when a device is plugged in at the far end of the CAT5 cable and that device is drawing current. Operates up to 24V POE. It uses shielded connectors and cat5 cable for ultimate protection. Gigabit compatible.

The POE-INJ-S does not have any LED indicators. It functions at any voltage. It uses shielded connectors and Cat5 cable for ultimate protection. Gigabit compatible.

(Spec Sheet)

POE - Power Over Ethernet POE Crossover Cable

The POE-XOVER is a unique cable that converts a standard POE pinout to a reverse voltage or non-standard pinout. This cable is good for operating reverse voltage POE devices like Canopy and Trango using low cost standard POE equipment. Creates a non-standard pinout with pin 4,5(V-) and 7,8 (V+). Accepts any voltage input. (Spec Sheet)

POE - PowerTap

The POE-PowerTap is a unique tool that allows easy testing or monitoring of POE voltages. It also can be used to tap into the POE voltage from a switch or POE Inserter and extract the voltage to flying lead wires up to 12awg. Other uses include injecting POE voltage into a CAT5 cable from flying lead wires. The device taps into the passive POE pinout pins 4,5(V+-) and 7,8 (V+-). It can handle up to 2A.
(Spec Sheet)