office (801) 432-0003
fax (801) 618-4220
info@tyconpower.com
Introducing Tycon Power Systems Products Designed Especially for Ubiquiti and Mikrotik
UPS Pro™
300W Backup Power System for Ubiquiti, Mikrotik, etc.
Features
- 192W Maximum Continuous Output
-
7 Switched 24VDC POE Ports, 1 Data Uplink Port
-
-
-
-
-
-
Applications
|
|
Description
The UPSPro™ 300W UBNT outdoor UPS system is designed specifically for
24VDC POE equipment like that from Ubiquiti, Mikrotik, Tranzeo, etc.
The system provides 192W of continuous total regulated 24VDC power on
7
switched power over Ethernet (POE) ports. There is also a data
uplink port if an external data connection is desired. The system is
powered from 120/240VAC grid power.
The
proprietary charge controller maintains the proper charge on the
batteries to prevent over charge and controls the load to prevent
over-discharge.
The weatherproof enclosure with security locks has multiple ports
for CAT5 cable, solar and other cabling. It is vented to prevent
residual buildup of any hydrogen gas. The included bracket kit
allows for the enclosure to be pole mounted or wall mounted. The
systems are rated to operate over a wide temperature range of -30C
to +60C.
There are 3 system configurations available: 51Ah battery capacity, 102Ah battery capacity and also a system without batteries for those customers who want to use their own sealed lead acid type batteries. Battery life on the high performance GEL cells is rated at 5 years. Typical recharge time from a full discharge is just a few hours. The controller is capable of charging WET and GEL/AGM battery types.
There is a generous amount of space reserved inside the enclosures
for customer electronics such as controllers, wireless AP or CPE
cards, sensors, inverters, etc. The standard component layout is
designed for ease of maintenance.
Equipment runs on battery power which isolates it from power line
surges which is a main cause of outdoor equipment failure.
UPS Pro™
60W Solar Ready Backup Power System for Ubiquiti, Mikrotik, etc.
Features
- 60W Maximum Continuous Output
-
4 Switched 24VDC POE Ports, 1 Data Uplink Port
-
-
-
-
-
-
Applications
|
|
Description
The UPSPro™ UBNT outdoor UPS system is designed specifically for
24VDC POE equipment like that from Ubiquiti, Mikrotik, Tranzeo, etc.
The system provides up to 60W of continuous total DC power on 4
switched power over Ethernet (POE) ports. There is also a data
uplink port if an external data connection is desired. The system is
powered over Ethernet cable from an included 150W AC to DC power
supply with POE inserter.
The system is also Solar Ready™ so an optional solar panel kit (TPSK24)
can be added anytime to make a complete standalone remote power
system or utilize the solar capacity to extend the backup time. The
proprietary charge controller maintains the proper charge on the
batteries to prevent over charge and controls the load to prevent
over-discharge.
The weatherproof enclosure with security locks has multiple ports
for CAT5 cable, solar and other cabling. It is vented to prevent
residual buildup of any hydrogen gas. The included bracket kit
allows for the enclosure to be pole mounted or wall mounted. The
systems are rated to operate over a wide temperature range of -30C
to +60C.
There are 3 system configurations available: 51Ah Battery capacity
for 20hours backup time, 102Ah battery capacity for 40 hours backup
time and also a system without batteries for those customers who
want to use their own sealed lead acid type batteries. Battery life
on the high performance GEL cells is rated at 5 years. Typical
recharge time from a full discharge is 20 hrs for the 51Ah battery
and 40 hrs for the 102Ah battery. Recharge times will be faster with
optional solar panel kits and depending on size of panel used.
There is a generous amount of space reserved inside the enclosures
for customer electronics such as controllers, wireless AP or CPE
cards, sensors, inverters, etc. The standard component layout is
designed for ease of maintenance.
Equipment runs on battery power which isolates it from power line
surges which is a main cause of outdoor equipment failure.
Solar Kits for UPS Pro™ 60W Backup Power System
for Ubiquiti / Mikrotik
Solar kits are selected based on total equipment load and peak sun hours at the install location. The chart below can help in the selection of the correct panel kit for the load that is required by your equipment. The chart shows the continuous load that the panel kit can support.
Panel kits come with a high efficiency multicrystalline solar panel, an outdoor rated 12AWG power cable, and a side of pole mount to mount the solar panel to a 2" to 4" diameter pole or a wall. Large diameter surfaces like wooden telephone poles would utilize the wall mount feature of the bracket. (Spec Sheet)
|
Solar Kits |
6 Hours Peak Sun |
3 Hours Peak Sun |
|
TPSK24-85W |
20W continuous |
10W continuous |
|
TPSK24-120W |
30W continuous |
15W continuous |
|
TPSK24-240W |
60W continuous |
30W continuous |
Add a Wind Turbine for Uptime Insurance
A wind turbine helps to keep the batteries charged through long periods of cloudy weather or storms. It is an excellent source of uptime insurance for remote sites. Our 400W 24VDC wind turbine is a good solution for these type of applications. The 6 blade design operates at lower wind speeds and the turbine is whisper quiet even at high speeds. The turbine offers automatic overspeed protection and comes with it's own battery charge controller. It mounts to the top of a 41mm inside diameter pole.
Other Tycon Power Systems Products compatible with Ubiquiti and Mikrotik
RPPL2424-18-30
8W continuous, 24VDC Remote Power System
RPST1224-100-60
15W continuous, 24VDC Remote Power System
RPST2424-50-120
30W continuous Remote Power System
TP-POE-24
24VDC POE Inserter with built in surge supression
TP-POE-18
18VDC POE Inserter with built in surge supression
TP-DCDC-1224
9-36VDC input, 24VDC POE output voltage converter
TP-SCPOE-1224
12V Battery, 24VDC Regulated POE, dual input/dual output solar/POE
charge controller
TP-SCPOE-2424
24V Battery, 24VDC Regulated POE, dual input/dual output solar/POE
charge controller
TP-SSW5-NC
Universal POE Voltage 5 port 10/100 POE Switch
TP-SW5G-NC
Universal POE Voltage 5 port 10/100/1000 Gigabit POE Switch
TP-SW8-NC
Universal POE Voltage 8 port 10/100 POE Switch
TP-NCMS312-24
12 Port 24VDC Midspan Inserter, Rack Mount, AC Operation
TP-NCMS412-24
12 Port 24VDC Midspan Inserter, Rack Mount, AC or DC Operation
TP-ESP-100-POE24
Ethernet / POE surge suppressor for 24VDC POE Output
ENC-ESP-100-POE
Weatherproof Outdoor Enclosure for TP-ESP-100 surge suppressor
TP-POE-1224
802.3af converter, 24VDC POE output
Product Selector
Backup Power Systems
UPS-ST24-50-8-UBNT
192W 1200VA backup power system, 7 switched 24VDC
POE ports, 51Ah Battery
UPS-ST24-100-8-UBNT
1192W 2400VA backup power system, 7 switched 24VDC
POE ports, 102Ah Battery
UPS-ST24-NB-8-UBNT
192W backup power system, 7 switched 24VDC POE
ports, NO BATTERY
Solar Ready:
UPS-ST2424-50-UBNT
60W 20hr backup power system, 4 switched 24VDC
POE ports, 51Ah Battery, Solar Ready
UPS-ST2424-100-UBNT
60W 40hr backup power system, 4 switched 24VDC
POE ports, 102Ah Battery, Solar Ready
UPS-ST2424-NB-UBNT
60W backup power system, 4 switched 24VDC POE
ports, NO BATTERY, Solar Ready
Solar Kits
TPSK24-85W
24VDC 85W Multicrystalline solar panel, side
of pole mount, 12AWG outdoor cable
TPSK24-120W
24VDC 120W Multicrystalline solar panel, side
of pole mount, 12AWG outdoor cable
TPSK24-240W
24VDC 240W Multicrystalline solar panel, side
of pole mount, 12AWG outdoor cable
Wind Turbine
TPW-400N-24
24VDC 400W Wind Turbine with controller
|
Ubiquiti Power Requirements |
|
|
Rocket |
6.5W |
|
Rocket GPS |
8W |
|
Nanostation 2 |
5W |
|
Nanostation M |
8W |
|
NanoBridge M9 |
6.5W |
|
NanoBridge M2,M5 |
5.5W |
|
NanoBridge M3, M365 |
8W |
|
Bullet M2 |
7W |
|
Bullet M5 |
6W |
|
Picostation M HP |
8W |
|
PowerBridge |
8W |
|
AirGrid M HP |
3W |
|
Aircam |
2.4W |
|
Aircam Dome |
3.5W |
|
Aircam Mini |
3W |